INNOVATE - INTEGRATE - INITIATE
UAV Integrated Tunable Microwave
World's first UAV integrated tunable microwave payload technology. NON-CONTACT frequency modulated inspection for coatings analysis and monitoring. An NDT technique requiring no removal of the outer layers.
- >Dielectric protective layer thickness and condition
- >Oxide formation prior to corrosion
- >Corrosion and surface defects on metallic surface
- >Water ingress into polymer layer detection
- >Propagation of water content through dielectric
- >Adhesion of protective layer to the metallic surface
Estimate Deployment Date: 01/10/2018
Simultaneous Location And Mapping (SLAM) Internal UAV system
- >'Prometheus' system designed to rapidly capture data in inaccessible and dangerous zones
- >Fully encapsulated propulsion system
- >Light weight collision tolerant design
- >Confined space specialisation
- >Encased electronics for water/dust protection (IP64)
- >Sub 15mm accuracies
- >Automated confined space inspection
- >Eliminate Human resource exposure and entry into hostile environment
Estimate Deployment Date: 01/07/2018
Contactless UT RFID
Wireless and Non-Destructive (WAND) system, consists of two parts – a compact, battery-free sensor and a handheld probe. The sensor is entirely passive and can be permanently installed onto a structure.
The lightweight probe powers up the sensor by non-contact inductive coupling when it is brought nearby (even if the patch is under material). The sensor then sends out an ultrasonic wave into the structure and detects the received signal.
This is then transmitted back wirelessly to the probe where the signal is analysed. For our internal corrosion system, the analysed signal provides structural thickness.
Estimate Deployment Date: 01/06/2018
Our UV Corona System works by using UV spectrum data capture sensors to allow for visualisation of effects, invisible to the naked eye.
When an electrical component suffers a degradation in insulation and subsequent exposure, the air around the fault becomes ionized. UV Corona can detect these faults and allow operators to act before catastrophic failure becomes imminent.
Mounting this system to our UAV delivery platform allows us to reach inaccessible sites, thus limiting extensive risk to personnel and also ensuring inspection on a more regular basis.
Our system can be deployed almost instantaneously to check for damage at key infrastructure and quickly help clients to best allocate resources.
Click on the link (left) to view footage of Texo Drone Survey and Inspection Ltd’s final UV Corona Drone field trial. The footage shows our UV Corona detection payload, integrated onto our custom built UAV Corona platform. Our system is then tasked with detecting failing Semi-Conductor componentry at height and with performing a detailed inspection of subsequent transmission line conductors. Note that when detected, non - visual UV discharge can be refined to point of source for specific component failure.
To find the nearest Texo DSI office or regional strategic location closest to you
Texo Drone Survey & Inspection Ltd
8 Stepfield Industrial Estate, Witham, Essex CM8 3TH
Telephone +44 (0)1376 533 979
NorthEast Regional office
Bassington Lane, Cramlington, Northumberland, NE23 8AF
Telephone +44 (0)1289 690 069
37 Waterloo Quay
Aberdeen, Scotland AB11 5BS
Telephone +44 (0)1224 531 321
Telephone +44 (0)1376 533 979
Fax +44 (0)1376 515 946
Address 8 Stepfield Industrial Estate, Witham, Essex CM8 3TH
EMERGENCY 24hr CONTACT NUMBER
Telephone +44 (0)7841 019 860
Texo Group Ltd Head Office
Texo House, Kingshill Park,
Prospect Road, Westhill Aberdeen,
AB32 6FT, Scotland, UK
Telephone +44 (0)1224 446 600